Description | Spatial | Attributes |
Tax parcel map of Waupaca County, Wisconsin. The layer was derived from a variety of source maps including: mylar county parcel maps, plats of surveys, deed descriptions, subdivision maps, certified survey maps, highway right-of-way plats, and township highway right-of-way maps. These source materials were of several different scales and were from dates ranging from the early 1850's to the present. This map provides a useful representation of the geometry and topology of tax parcels and is suitable for its intended purpose. It is not, however, meant to be used for the determination of land ownership or to be in any way a substitute for the land ownership and interest descriptions contained in individual deeds. The tax parcel layer is available in a county-wide or individual layer for each township, city, or village. The layer is based on the Waupaca County Coordinate System (WCCS).
This information is intended to be used primarily for the base layer for overlaying all of the digital layers that were digitized in the parcel conversion efforts of Waupaca County. The primary use of the digital parcel layer is to assist the Waupaca County Property Listing Office in their daily activities and is the official tax parcel map source.
publication date
Waupaca County G.I.S. layers are for informational purposes only and are not intended to represent evidence in title. The representations on these maps could in fact be in error and should not be relied upon as the sole determining factor in the location of any given parcel. Waupaca County is not responsible for any inaccuracies contained herein. Individuals should consult legal representation or professional survey advice to confirm and insure accuracy of a given parcel description.
Waupaca County Land Information Office, c/o Ian Grasshoff, 811 Harding Street
Relative horizontal positional accuracy for the placement of the parcel lines is estimated at +/- 2.5 feet in 1000 feet in platted areas and +/-5 feet in 100' in un-platted areas. Current annual parcel maintenance strives to improve this positional accuracy tolerance by using coordinate geometry to enter all new changes. If the original parcel data in an area is found to be inaccurate by comparing the digital lines against measurement information contained in the original source documents (deeds, subdivision plats, and CSMs), coordinate geometry is used to re-map the area.
Feature geometry.Definition Source:
ESRI
Internal feature number.Definition Source:
ESRI
Feature geometry.Definition Source:
ESRI
The Waupaca County Parcel Identification Number. The number is comprised of a 2 digit municipality number, a 2-3 digit section number, a 2 digit parent parcel number, and up to 4 digits representing parcel splits.Definition Source:
Waupaca County Land Information Office
Certified Survey Map volume and page or document numberDefinition Source:
Waupaca County Land Information Office
The Waupaca County Parcel Identification Number. The number is comprised of a 2 digit municipality number, a 2-3 digit section number, a 2 digit parent parcel number, and up to 4 digits representing parcel splits.Definition Source:
Waupaca County Land Information Office
Certified Survey Map volume and page or document numberDefinition Source:
Waupaca County Land Information Office
Parcel landuse codeDefinition Source:
Waupaca County Land Information Office
Attributes contained in the anno.block Text Field are used to identify the Text contained in the annotation attribute.Definition Source:
Waupaca County Land Information Office
Attributes contained in the anno.other Text Field are used to identify the Text contained in the annotation attribute.Definition Source:
Waupaca County Land Information Office
Attributes contained in the anno.par_csm Text Field are used to identify the Text contained in the annotation attribute.Definition Source:
Waupaca County Land Information Office
Attributes contained in the anno.par_dim Text Field are used to identify the Text contained in the annotation attribute.Definition Source:
Waupaca County Land Information Office
Attributes contained in the anno.par_lot Text Field are used to identify the Text contained in the annotation attribute.Definition Source:
Waupaca County Land Information Office
Attributes contained in the anno.pin Text Field are used to identify the Text contained in the annotation attribute.Definition Source:
Waupaca County Land Information Office
Attributes contained in the anno.street Text Field are used to identify the Text contained in the annotation attribute.Definition Source:
Waupaca County Land Information Office
Attributes contained in the anno.subdiv Text Field are used to identify the Text contained in the annotation attribute.Definition Source:
Waupaca County Land Information Office
Attributes contained in the anno.water Text Field are used to identify the Text contained in the annotation attribute.Definition Source:
Waupaca County Land Information Office
The following attributes are also a part of the Arc Attribute Table for the tax parcel data layer (parcel.aat) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, FNODE#, TNODE#, LPOLY#, RPOLY#, LENGTH, PARCEL#, PARCEL-ID, ANGLE, DISTANCE, RADIUS, DELTA, TANGENT, ARCLENGTH, SIDE, RADIUS2, TANGENT2, $ID, $FROMNODE, $TONODE, $LEFTPOLYON, and $RIGHTPOLYGON. The following attributes are also a part of the polygon attribute table for the tax parcel data layer (parcel.pat) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, AREA, PERIMETER, PARCEL#, and PARCEL-ID. The following attributes are also a part of the polygon attribute table, PARCEL region subclass, for the tax parcel data layer (parcel.patparcel) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, AREA, PERIMETER, PARCEL#, and PARCEL-ID. The following attributes are also a part of the polygon attribute table, OTHER region subclass, for the tax parcel data layer (parcel.patother) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, AREA, PERIMETER, OTHER#, and OTHER-ID. The following attributes are part of the Text Attribute Table for the historical parcel information data layer (parcel.tatblock) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, BLOCK#, BLOCK-ID, X, Y, OFFSETX, OFFSETY, HEIGHT, SYMBOL, and LEVEL. The following attributes are part of the Text Attribute Table for the historical parcel information data layer (parcel.tatother) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, OTHER#, OTHER-ID, X, Y, OFFSETX, OFFSETY, HEIGHT, SYMBOL, and LEVEL. The following attributes are part of the Text Attribute Table for the historical parcel information data layer (parcel.tatpar_csm) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, PAR_CSM#, PAR_CSM-ID, X, Y, OFFSETX, OFFSETY, HEIGHT, SYMBOL, and LEVEL. The following attributes are part of the Text Attribute Table for the historical parcel information data layer (parcel.tatpar_dim) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, PAR_DIM#, PAR_DIM-ID, X, Y, OFFSETX, OFFSETY, HEIGHT, SYMBOL, and LEVEL. The following attributes are part of the Text Attribute Table for the historical parcel information data layer (parcel.tatpar_lot) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, PAR_LOT#, PAR_LOT-ID, X, Y, OFFSETX, OFFSETY, HEIGHT, SYMBOL, and LEVEL. The following attributes are part of the Text Attribute Table for the historical parcel information data layer (parcel.tatpin) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, PIN#, PIN-ID, X, Y, OFFSETX, OFFSETY, HEIGHT, SYMBOL, and LEVEL. The following attributes are part of the Text Attribute Table for the historical parcel information data layer (parcel.tatstreet) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, STREET#, STREET-ID, X, Y, OFFSETX, OFFSETY, HEIGHT, SYMBOL, and LEVEL. The following attributes are part of the Text Attribute Table for the historical parcel information data layer (parcel.tatsubdiv) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, SUBDIV#, SUBDIV-ID, X, Y, OFFSETX, OFFSETY, HEIGHT, SYMBOL, and LEVEL. The following attributes are part of the Text Attribute Table for the historical parcel information data layer (parcel.tatwater) but were autogenerated by ESRI software or have been defined elsewhere: FID, SHAPE, WATER#, WATER-ID, X, Y, OFFSETX, OFFSETY, HEIGHT, SYMBOL, and LEVEL.
For more information on the source of the attributes for the coverage refer to contact person.